Syngear SH-7000 Series
Summit Syngear® SH®-7000 Series synthetic gear and bearing oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming. These synthesized hydrocarbon fluids (SHF) provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The high inherent viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the Summit Syngear® SH® Series lubricants substantially reduces power consumption and gearbox operating temperature, further prolonging the useable life of this lubricant.
Summit Syngear® SH® Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or roller element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs. Summit Syngear® SH®-7032 through Syngear® SH®-71000 are also recommended for use in applications where the corrosion of yellow metals is a concern as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper. The Summit Syngear® SH®-Series lubricants are compatible with essentially all seal materials, plastics and paint, including nitrile Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.
Syngear® and SH® are registered trademark of Summit Industrial Products.